Licence Description
Read the below licence upgrade descriptions and details, then select the required part number from the above drop-down list.
NOTE: To avoid delay, when selecting the licence, please ensure you provide the hardware and electronic serial numbers for the unit you wish to upgrade. These unique details allow us to configure the license for your specific hardware.
Part | Description | Details |
9003246 | DVE Licence H.264 HD 4:2:0 Encode | Enables H.264 HD 4:2:0 encoding for the DVE5100. *Requires pre-installation of internal H.264 encoder hardware* |
9003247 | DVE Licence H.264 4:2:2 Encode | Enables H.264 4:2:2 8-bit encoding for the DVE5100 *Requires pre-installation of internal H.264 encoder hardware AND pre-installation of 9003246 to be licensed first* |
061-2887 | DVE Licence MPEG-2 SD 4:2:0 Encode | Enables MPEG-2 SD 4:2:0 Encoding (1.5-150MBits) for the DVE5100. |
062-4844 | DVE Licence MPEG-2 SD Low Delay Encode | Enables MPEG-2 SD Low Delay 40mS encoding for the DVE5100. |
057-3705 | DVE Licence MPEG-2 SD 4:2:2 Encode | Enables MPEG-2 SD 4:2:2 Encoding (2 - 50MBits) for the DVE5100. *Requires pre-installation of 061-2887 to be licensed first* |
057-3760 | DVE Licence MPEG-2 HD 4:2:0 and 4:2:2 Encode |
Enables MPEG-2 HD (4:2:0 & 4:2:2) encoding for the DVE5100. Also enables:
|
062-4415 | DVE Licence ASI over IP Encapsulation | Enables Transport Stream over IP output streaming Transport Stream from External input or internal encoder is passed to the IP output RJ45 interface. |
062-4426 | DVE Licence ASI over IP Decapsulation | Enables IP Input to DVE with selection of one in four pre-encapsulated ASI streams which can then be made available for modulation using internal modulator / ASI output or for routing to ASI REMUX (requires REMUX licence) |
057-3771 | DVE Licence Integral HPA Control | Enables RM&C of all popular HPAs via FSK L-Band or via M&C Output Connector |
057-3716 | DVE Licence BISS-1 / E Encryption Upgrade | Enables BISS 1/E Encryption for the DVE5000/5100 |
9002404 | DVE Licence Encoder/ Modulator Switch | Enables DVE5100 Video Encoder to switch between full Video Encoder/Modulator and ASI input Modulator only. Modes Cannot be used with DVM5100 Modulator |
9003905 | DVM Licence Encoder Enable | Enables licencable Encoder within DVM5100. Amending model number to DVE5100, Encoder licence can then be subsequently applied to the upgraded unit. |
057-3683 | DVE Licence Encoder/Modulator Enable | Enables DVB-S QPSK Modulated Output for the DVE5100-A ASI output units |
9009473 | DVE Licence DVB-S2 QPSK Modulation | Enables 20% and 35% Roll-Off for DVB-S2 QPSK Modulation Scheme for the DVE5100 |
9009326 | DVE Licence DVB-S2 8PSK Modulation | Enables 20% and 35% Roll-Off for DVB-S2 8PSK Modulation Scheme for the DVE5100. |
057-6928 | DVE Licence DVB-S2 16APSK & 32APSK Modulation | Enables 20% and 35% Roll-Off for DVB-S2 16/32APSK for the DVE5100. *Requires pre-installation of 9009326 to be licensed first* |
DVES2-5PC | DVE Licence DVB-S2 5% Roll Off | Enables use of 5%, 10% and 15% for DVB-S2 Roll-Off Schemes for the DVE5100. |
057-6939 | DVE Licence DVB-T Low Delay COFDM (70MHz O/P only) | Enables DVB-T COFDM modulation on the 70MHz output for the DVE5100 This also provides the ability to have selectable ASI / 70MHz COFDM output on Satcom L-Band units. N.B.: L-Band and 70MHz outputs cannot operate simultaneously. |
057-6950 | DVE Licence LMS-T COFDM (70MHz O/P only) | Enables LMS-T COFDM modulation on the 70MHz output for the DVE5100. This also provides the ability to have selectable ASI / 70MHz COFDM output on Satcom L-Band units. N.B.: L-Band and 70MHz outputs cannot operate simultaneously. |